Device Connectivity & Network Checks Simplified

Introduction

Every connected device — whether it’s a printer, scanner, or computer — relies on stable network communication. This guide helps you verify that your devices are correctly connected to your Wi-Fi or local network and remain visible to other systems in your workspace.

Step-by-Step Network Check Process

1. Confirm network connection: Ensure your router is powered on and broadcasting the correct Wi-Fi network. Check that your device and printer are connected to the same network (SSID).
2. Verify IP address: Open your device’s network settings and make sure it has a valid IP address (for example, 192.168.x.x). Invalid or blank addresses may indicate a connection issue.
3. Run a quick ping test (optional): On Windows, open Command Prompt and type ping [device IP] to confirm communication. On macOS, use Network Utility or Terminal for the same.
4. Check firewall permissions: Some security settings may block local device discovery. Make sure your computer’s firewall allows communication on the same network.
5. Restart devices: Power-cycle your printer, router, and computer if devices still don’t appear in each other’s list. Restarting helps renew network leases safely.

Improving Long-Term Stability

To keep your devices connected consistently, follow these safe and easy habits:

• Keep routers in an open area with minimal obstruction.
• Ensure your printer and devices stay updated with recommended firmware.
• Avoid switching Wi-Fi networks during printing or scanning.
• For offices, label device names clearly (e.g., “OfficePrinter_1”).

Security Note

Always connect devices to a secure, password-protected Wi-Fi network. Avoid public or guest connections for printing or scanning. Conslyca Ltd encourages using your device’s built-in configuration tools — no third-party software or remote access is required for these steps.